Changes in temperature will have an impact on Solar Panel power generation. How can we increase power generation?
Solar Street Light manufacturers Shao. There are three main points.
1. Remove snow in time
At this time you may need a tennis ball. It would be a good idea to use tennis balls to bounce and vibrate on tilted panels to make the snow fall. Of course, other tools can also be borrowed. In this way, you will find that the effect of your power generation system is doubled;
2. Install solar panels at a large angle
This can reduce the speed of snow accumulation and avoid the trouble of clearing snow from time to time. "After you hesitate to choose 30 degrees or 40 degrees, obviously 40 will be a better solution." Pierce said.
3. Keep a little distance from the place when installing
Snow will not accumulate on the bottom when it slides down, so that it slowly accumulates and covers the entire battery assembly.
Solar street light is an alternative energy source with low cost and high efficiency. As a substitute for traditional electrical energy, new photovoltaic power generation systems are being installed in large numbers in every household. And once the grid connection is achieved, even if the snow cover slightly hinders solar power generation, the overall power supply is still normal.
With continuous research and installation, solar power is still a good choice for Americans who want to use renewable energy.
The above is the key point of how to increase the solar panel power generation at low temperature. As long as the above is done, the power generation will increase. In fact, what matters is the conversion rate and cost.
